theater 1

Theater 1

Vento 100   (LR)

Vento 100

        ➤3-way Bass reflex system
    ➤Power handling: 220 / 400 W
    ➤Freq Resp: 20Hz…40kHz
    ➤Crossover freq: 170Hz / 3.2kHz
    ➤Woofer: 2 x 8.7" (220 mm)
        Titanium-graphite (Wave surround)
    ➤Midrange: 6.8" (1 x 174 mm),
        Titanium-graphite (Wave surround)
    ➤Tweeter: 1" (1 x 25 mm), Ceramic
    ➤Nominal Impedance: 4...8 Ω
    ➤Warranty: 5 years
    ➤Dim: 12.8" W x 45.5" H x 16.5" D
         (32.5 x 115.5 x 42 cm)
    ➤Weight: 86.42 lbs.   (39.2 kg)

Vento 50 Center-Channel

Vento 50

        ➤3-way Bass reflex system
    ➤Mid-/Woofers: 2 x 6.8&q;uot; (174 mm)
        Titanium-graphite (Wave surround)
    ➤1" (25 mm) Ceramic tweeter
    ➤26 - 40kHz frequency response
    ➤Crossover freq: 300Hz / 3kHz
    ➤Nominal Impedance: 4...8 Ω
    ➤120 - 200 Watts (Nom. power handling)
    ➤Dim: 24" W x 8.1" H x 14.4" D
         (61 x 20.5 x 36.5 cm)
    ➤Weight: 32 lbs.   (14.5 kg)

Vento 10 OnWall Surrounds

Vento 10 OnWall

        ➤2-way bass reflex
    ➤Mid-/Woofers: 6.&q;uot; (154 mm)
        Titanium-graphite (Wave surround)
    ➤1" (25 mm) Ceramic tweeter
    ➤Nominal Impedance: 4...8 Ω
    ➤40 - 40kHz frequency response
    ➤Crossover freq: 3kHz
    ➤60 - 100 Watts (Nom. power handling)
    ➤7.7" W x 11.8" H x 3.5" D
         (19.5 x 30 x 9 cm)
    ➤Weight: 11 lbs.   (5 kg)

No. 25 Subwoofer

No. 25

        ➤Driver: 15", long-throw, carbon fibre cone
        inverted carbon fibre dust-cap
    ➤Low Frequency Extension: -6dB at 14 Hz
    ➤Inputs: High Level Neutrlk Speakon
        Low Level stereo RCA, LFE RCA, LFE XLR
        SMA for wireless antenna
    ➤Outputs: High Level, LFE RCA, LFE XLR Daisy Chain
    ➤Finish: Piano Black Lacquer, 12 coats
    ➤Power Output: 1,000 watts (RMS)
        Ultra High-Current Power Supply
    ➤Amplifier Type: NextGen3 Class D
    ➤Dimensions: 29" W x 21.3" H x 30" D
    ➤Net Weight: 168 lbs. (76 kg)

AV8805 - AV Pre-Amplifier

AV8805 - AV Pre-Amplifier

        ➤13.2 channel processing
    ➤Latest surround formats including Dolby Atmos, DTS:X, Auro-3D
    ➤Audyssey MultEQ XT32, LFC, Sub EQ HT, Dynamic Volume & EQ
    ➤Built-in Bluetooth and Wi-Fi
    ➤HEOS wireless music streaming technology
    ➤Ultimate visual quality with 4K/60 Hz full-rate pass-through
    ➤4:4:4 color res, HDR, BT.2020, Dolby Vision, HLG pass-through
    ➤eARC (Enhanced Audio Return Channel)
    ➤Eight HDMI inputs with full HDCP 2.2 support
    ➤Analog to HDMI conversion and SD to HD/4K Upscaling
    ➤Network music streaming support
    ➤Setup Assistant and Marantz AVR Remote app

MM8077 7-Channel Amplifier

MM8077 7-Channel Amplifier

        ➤Power Output 150W 8Ω, 180W 6Ω
    ➤S/N Ratio 105dB
    ➤Freq. Response (Analog In) 8Hz - 100kHz (+/- 3dB)
    ➤Current Feedback Topology
    ➤Discrete Amplification
    ➤Power Transformer Toroidal
    ➤Chassis Copper Plated
    ➤Balanced & Unbalanced: 7ch
    ➤DC Triggers 1 In / 1 Out
    ➤Flasher In/IR Receiver In/Emitter out
    ➤Front Panel Aluminum/Glass-reinforced resin
    ➤Power Requirement AC 120 V, 60 Hz
    ➤Power Consumption 800W (Standby: 0.4W)
    ➤17.32"W x 7.29"H x 15.1"D    45.41 lbs.
Stewart Filmscreen

WallScreen Series


        ➤Screen Type: Fixed Frame
    ➤Sizes Up to 267" diagonal
    ➤Four different framing solutions
    ➤Frame construction: aircraft grade aluminum
    ➤Frame finish: Velvet Velux Overlay
    ➤Snap mounted system for easy alignment
    ➤Screen material gain: 0.7 to 3.0
Wolf Cinema

TXF-1900 UHD/8K Laser/Phosphor Projector


        ➤Native UHD/4K 0.69" diagonal three-chip D-ILA engine
    ➤8K Duo™ 8192 x 4320 on-screen 8K imaging
    ➤BLU-escent™ laser/phosphor illumination - up to 20,000hr laser diode life
    ➤2400 ANSI, ~ infinite dynamic CR performance
    ➤Frame Adaptive HDR10, HDR10+ and Hybrid Log Gamma capabilities
    ➤Dual 48Gbps HDMI 2.1 / HDCP 2.3 inputs - 8K/60P and 4K/120P (4:4:4)
    ➤Home "Theater Extreme" Projector
    ➤Hand calibrated for both 2D and 3D viewing